Bangladesh Electricity Bill Guide: DESCO, DPDC, Prepaid Meters, Tariffs and Complaint Steps
Whether you live in Dhaka or elsewhere in Bangladesh, this reusable checklist explains how to read and pay an electricity bill, compare DESCO and DPDC service with prepaid and postpaid metering, investigate a changed amount, and report an incorrect bill, outage or meter fault without losing important evidence.
Overview
Your electricity account normally combines several pieces of information: the customer or account number, billing period, meter reading, consumption, applicable tariff calculation, taxes or VAT where shown, and any additional charge or adjustment. The exact layout depends on the utility and whether the connection is prepaid or postpaid.
DESCO and DPDC are separate electricity distribution utilities. The correct bill-checking portal, payment method, outage channel and service rules depend first on the distributor serving your address. A household with a DESCO connection should not assume that a DPDC procedure will work, even if both accounts are in Dhaka. If you are unsure, check an older bill, the meter label, tenancy or connection documents, or the utility information displayed on the official website or customer-service channel.
| Service or utility | How billing generally works | What to check first |
|---|---|---|
| DESCO | May use prepaid or postpaid arrangements depending on the connection and service area. | Account number, meter type, service address and the official DESCO payment or complaint route. |
| DPDC | May use prepaid or postpaid arrangements depending on the connection and service area. | Customer number, bill period, meter details and the official DPDC payment or complaint route. |
| Prepaid meter | Credit is added before use. The meter deducts usage and may display balance, consumption or alerts. | Meter number, recharge reference, remaining balance and any emergency or low-credit message. |
| Postpaid meter | Usage is recorded during a billing period and charged on a later bill. | Previous and current readings, due date, billed units and payment receipt. |
This is a practical guide rather than a tariff schedule. Electricity tariff slabs, VAT, surcharges, payment channels and meter procedures can change. Always verify the current amount and instructions through your distributor and the latest applicable notice before making a complaint or relying on a calculation.
Checklist by scenario
Before paying a postpaid bill
- Confirm the name, address, customer number or account number and meter number.
- Check the billing month or period and the payment due date.
- Compare the current meter reading with the reading printed on the bill. If the bill identifies an estimated reading, record that separately.
- Review the units consumed against your previous bills. A change may be reasonable after increased use of air conditioning, pumps, heaters, lifts, refrigerators or other appliances, but a sharp unexplained change deserves investigation.
- Separate the energy charge from demand, service, adjustment, tax, VAT, surcharge or late-payment lines where they appear.
- Pay through a current official or authorised channel and save the receipt, transaction ID, date and amount.
Reading a prepaid meter
- Write down the meter number and confirm that it matches the number associated with your account or recharge token.
- Check the display for remaining credit, current consumption, low-balance warnings and any error code. Display options vary by meter model.
- Use the distributor’s current recharge instructions. Enter a token carefully if the system provides one, and keep the transaction message until the credit appears.
- After recharging, check the new balance. If the balance does not update, do not repeatedly buy tokens before confirming whether the first transaction succeeded.
- Keep a short record of recharge date, amount, token or transaction reference and the balance before and after recharge.
When the bill changes unexpectedly
Start with evidence, not an assumption. Photograph the meter display, note the date and time, and retain the current bill and at least one earlier bill. Compare units, readings, billing days, adjustments and any newly displayed charge. Also consider whether the property had a vacant period, a new appliance, a shared connection, a change in occupants, a faulty appliance or a meter-reading visit.
If the current reading is lower than the previous reading, the account has been billed for the wrong meter, or the bill includes a charge you cannot identify, contact the relevant utility through its official customer-service process. Ask for a billing review and record the complaint number or acknowledgement.
For an outage or meter fault
- Check whether the problem affects only your premises or nearby homes as well.
- For a local issue, check the main switch, internal fuse or breaker only if it is safe to do so. Do not open a meter or touch exposed wiring.
- Note the exact address, landmark, customer or meter number, time the outage began and any visible hazard such as sparks, smoke or a damaged cable.
- Report the incident through the current official outage or customer-service channel for your distributor.
- Keep the complaint reference and follow up if the stated response period passes without an update.
What to double-check
Tariff slabs: A postpaid bill may calculate energy charges in stages rather than applying one rate to every unit. Do not compare a single total with an online example unless the tariff date, connection category and consumption bands match.
Demand and service charges: These terms can relate to the connection or sanctioned load rather than ordinary household consumption. The meaning and applicability depend on the account category. If a demand or service line appears for the first time, ask the utility to explain the basis instead of deleting it from your calculation.
VAT, surcharge and late-payment amounts: These may be shown separately or included in a total. Check the bill’s own breakdown and the current notice before estimating the final payable amount. A late payment can also make a normal monthly comparison misleading.
Estimated or adjusted readings: A bill based on an estimated reading may later be corrected when an actual reading is recorded. Keep both bills and ask how an adjustment was calculated.
Payment confirmation: A successful wallet, bank or card message is useful evidence, but also confirm that the payment was applied to the correct customer or meter number. Never share a one-time password with a caller claiming to be a utility representative.
Common mistakes
- Using a search result, social-media post or old screenshot as the current payment or complaint instruction.
- Confusing the meter number with the customer number, account number or bill serial number.
- Paying a copied account number without checking the name and service address shown before confirmation.
- Comparing only the taka total while ignoring billed units, billing days, tariff category and adjustments.
- Discarding paper bills, SMS messages, token slips or payment receipts after a successful payment.
- Resetting, opening or attempting to repair a meter yourself. Meter tampering can be dangerous and may create a separate dispute.
- Reporting a fault without recording the complaint reference, making later follow-up difficult.
If a billing dispute remains unresolved, escalate in stages: first to the relevant distributor’s customer-service or billing office, then to the applicable higher-level utility or regulatory complaint process identified in the current official instructions. Present a concise timeline and copies of evidence rather than sending unrelated documents.
When to revisit this guide
Review this checklist whenever you receive a tariff, VAT, surcharge or payment-channel notice; change from postpaid to prepaid service; move into a new property; replace a meter; or see an unusual bill. It is also worth checking before seasonal periods when electricity use typically changes, such as hotter months or times when cooling equipment runs more often.
At the start of each billing cycle, take a meter photo and save the latest receipt. Before using any online bill-checking or recharge tool, confirm that the link belongs to the correct distributor and that its instructions are current. If the utility changes its portal, app, token format, hotline or complaint workflow, update your personal records immediately.
Action plan: identify your distributor, confirm whether the meter is prepaid or postpaid, record the meter and account numbers, photograph the current reading, check the bill breakdown, pay only through a verified channel, and save the receipt. If something does not match, pause further payment attempts, gather the evidence and file a documented request for review.